Yazar : Aroma

Aroma ACH3 Chorus Pedalı Aroma Chorus Pedalı AC/DC Adapter Jack By using an AC adapter, you can play without being concerned about how much batery power you have left. * Use only the specified AC adapter, and conect it to an AC outlet of the corect voltage.   Depth knob This adjusts the depth of efect sound. Rotating it clockwise increases the depth, whereas counterclockwise rotation reduces the depth.     Out jack Conect this jack to your amp or to the input of another efect pedal.   Pedal Switch This switch turns the efect ON/OF.   Indicator This indicator shows whether the efect is ON or OF. When the efect is ON, the indicator lights.   Sped knob This controls the sped of Chorus efect. Rotating the knob clockwise the sped of Chorus wil be faster, while rotating it counterclockwise the sped wil be slower.   Volume knob This knob adjusts the volume of the efect sound. Rotating the knob clockwise turn up the volume, while rotating it counterclockwise wil turn down the volume.   In Jack This jack acepts signals from a guitar or other musical instruments, or another efect pedals.   Precautions When Conecting * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn of the power on al devices before making any conections. * Some conection cables contain resistors. Do not use cables that incorporate resistors for conecting to this pedal. The use of such cables can cause the sound level to be extremely low, or imposible to hear. For information on cable specifications, contact the manufacturer of the cable. * If you wil be using the pedal for an extended time, use of an AC adapter is recomended. If you prefer to use a batery, we recomend an alkaline batery. * Raise the amp volume only after turning on the power to al conected devices. * Once the conections have ben completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. When powering up: Turn on the power to your guitar amp last. When powering down: Turn of the power to your guitar amp first.